16
5. LCD meter (Optional, can be connected):
•
The LCD display indicates the following values: Battery
voltage, charging current, charging capacity, stored
capacity, and energy (V, A, W, Ah, Wh)
•
This information can also be displayed through the
Truma iNetX Pro Control Panel coming in Summer
2021.
6. Safety Mode:
•
The solar controller automatically recognises a missing
sensor, cable break or short-circuit of the sensor lines,
as well as unreasonable measuring values. In that case,
it will switch automatically to the usual charging voltage
rates of 20 °C / 25 °C being recommended by the
battery manufacturers.
Dismantling should be completed in reverse order.
Commissioning
The device is operational as soon as a solar panel is connected
(observe connection sequence).
The right to effect technical modifications is reserved!
Disposal
Neither the regulator nor the solar panel may
be disposed of with domestic waste. Instead,
they must be sent for recycling separately via
an approved collection point. By doing this you
are contributing towards reuse and recycling.
Summary of Contents for SDC12
Page 3: ...3 ...
