Trueshopping
www.TrueShopping.co.uk
Page:
of 26
22
Trouble Shooting
REASON
SOLUTION
Without output
Without
voltage
in
input
terminal.
Improper fuse or breaker.
Overload protective setting.
Check
the
fuse
or
breaker.
Replace fuse or breaker.
After cooling then try to
continue.
Current is too poor
Input voltage is too poor.
Bad connection.
One or more commute element
have been damaged.
Check
that
if
input
voltage is the same with
rated voltage.
Check grounding cable
and make sure have
well connection.
Replace.
After turning on the welder does not work
Control wire broken off.
Circuit plate damaged.
Check and replace.
Replace circuit plate.
Arc does not transfer
Loose of missing connections in
the cables.
Check all cables and
plugs. VIP: unplug at the
