Trueshopping
www.TrueShopping.co.uk
Page:
of 26
20
8. Open the power, press the switch spasmodically,
adjust the speed by turning the adjusting wire feed
speed knob.
9. Orient yourself on the area to be welded, and then
place the Face Shield over your eyes.
10. Press and hold the torch button and stroke the area
to be welded with the electrode wire to ignite the
arc.
11. Once the arc is ignited, tilt the electrode wire
forward at an angle of approximately 35
o
.
12. When the weld is complete, lift the electrode wire
clearly away from any grounded object, set the
Face Shield down and turn the Power Switch to the
“OFF” position.
13. Unplug the power cord from the electrical outlet.
14. Set the torch down on a suitable non flammable
surface.
