Trueshopping
www.TrueShopping.co.uk
Page:
of 26
9
Putting It All Together
After unpacking your new welder you should check if the
equipment has been damaged during transit and notify your
dealer if there are any missing or broken parts. Ensure that
the packing material is not blocking any air ways in the welder.
Fixing the face shield
Figure 2 Fixing the face shield
Fixing the Wheels
Place metal wheel bar through the holes in the
rear/bottom of welder and out the other side.
Attach one circlip to the groove closest to
welder on both sides so the bar is now held in
place.
Figure 3 The wheel bar
