Trueshopping
www.TrueShopping.co.uk
Page:
of 26
11
Electric shock: Please do not use the welding
source in the wet or wet areas to avoid any
injury or death.
Ensure the source underpan and earthing system of
the input source is connected.
You must ensure the risk of electric shock is
minimised by the installation of appropriate safety
devices. An RCCB (Residual Current Circuit Breaker)
should be incorporated in the main distribution
board. We also recommend that an RCD (Residual
Current Device) is used with all electrical products.
It is particularly important to use an RCD together
with portable products that are plugged into an
electrical supply not protected by an RCCB. If in
doubt consult a qualified electrician.
Always change the damaged or scuffed cable
before using the machine.
Keep dry, including any cloth, working area, wire,
welding torch, soldering turret and power supply.
Keep the body insulated from the work piece.
The operator should stand on a dry wooden board
or insulating platform of rubble shoes when
working in a sealed on moist area.
Dry and sealed gloves should be worn before
turning on the power.
