Trueshopping 62cc, Assembly & Owners Manual

Page: 9 / 170

1. Chain
2. Guide rail
3. Oil tank
4. Oil tank lid
5. Drive shaft
6. Chain
w heel h ousing
7. Hook
8. Chain
g uard
9. Sprocket
10. Chain
t ensioner
Pruning saw
! If you require the use of the extension pole
then attach it first in the same way as the
following
.
! When you are ready to assemble / use the
product, remove the protective cover from
the saw. Take care as the chain is very sharp.
! Ensure the engine is switched off before
using the saw.
Pole Attachment
To fit the different attachments to the
machine, you need to connect them to the
coupling on the end of the fixed engine pole.
1. Open the coupling and turn the retaining
handle to loosen the connection.
2. Line up the hole on the required tool
pole as shown below and push firmly
into the coupling.
3. Close the coupling again, tighten the
retaining handle, and pull and twist
the pole to ensure that it is secure.
7