TEC_TM_009 Rev. B
December 31, 2019
Page 37 of 50
TEMPER ATURE ADJUS TMENT
To adjust set-point, press the ZONE button to highlight the zone for adjustment. Once the zone is highlighted,
press DOWN or UP key on the control panel in multiple key strokes until the desired set-point is achieved. Each
key stroke equals a one degree change and is accompanied by an audible beep. When the desired set-point is
reached, press the ZONE button to return to “HOME” screen.
NOTES:
• THE TEMPER ATURE R ANGES FROM 4 0°F (4.4°C) TO 65°F (18.3°C) IN EITHER SECTION OF
THE UNIT
• INITIAL FACTORY SET-POINTS ARE 55°F (12.7°C) IN THE UPPER ZONE AND 4 5°F ( 7.2°C) IN
THE LOWER ZONE.
• THE INITIAL STROK E OF THE UP OR DOWN K EY WILL CHANGE THE PREVIOUS SET-POINT BY
ONE DEGREE.
MODE
LIGHT
ALARM
55°F
45°F
ZONE
MODE
LIGHT
ALARM
ZONE
ZONE
ZONE
ZONE 1
UPPER
55°F
ZONE 2
LOWER
45°F
ZONE 1
UPPER
55°F
ZONE
ZONE 1
UPPER
55°F
OR
55°F
45°F
UPPER ZONE 55ºF / LOWER ZONE 4 5ºF
SET POINT NAVIGATION
Summary of Contents for RESIDENTIAL Series
