TRUE RESIDENTIAL
®
TEC_TM_009 Rev. B
December 31, 2019
Page 22 of 50
STEP 4
Remove the P-clip by unscrewing the 1/4" Phillips
screw and remove the wire from the P-clip.
Image 4.
STEP 5
Pull reed switch wire though rain shield bushing
and set the wires aside for later use.
Image 5.
STEP 6: REMOVE RAIN SHIELD FROM CABINETS
Unscrew two Phillips screws facing down and two
on upper left and right side top of rain shield.
Remove the rain shield from the unit.
Image 6.
4
5
NOTE: ALL HARDWARE YOU REMOVE WILL BE
USED TO INSTALL THE NEW RAIN SHIELD.
NOTE: REPEAT STEPS 1-7 FOR EACH TR-30
UNIT YOU ARE INSTALLING.
6
Summary of Contents for RESIDENTIAL Series
