TEC_TM_009 Rev. B
December 31, 2019
Page 23 of 50
STEP 8
Install anti-sweat foam end panels on sides of units
which will be joined together.
Image 8.
8
2 PADS USED
4 PADS USED
X
X
✔
✔
✔
✔
✔
X
X
SIDE
FOAM PAD PLACEMENT
STEP 7
Remove the two 1/4" screws that hold the magnet
bracket for the louver grill on the left right side of
the units that are joining together. Remove both
screws and set the bracket aside. This bracket will
NOT reinstall with this application.
Images 7a & 7b.
NOTE: REINSTALL THE SCREWS THAT WERE
HOLDING THE BRACKET. THESE ARE USED TO
SUPPORT THE CASTOR ASSEMBLY HOUSING.
7b
7a
Summary of Contents for RESIDENTIAL Series
