CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
17
LATERAL TRAINER ASSEMBLY STEPS (continued):
STEP 1
1
: INSTALL TRANSCEND CONSOLE (continued):
a
) Remove the 8 screws in the circled
locations from the base of the
machine and remove the front plastic
cover.
unit. Secure power supply, Ethernet
cable, and coaxial cable to the frame
with the included zip ties.
f
) Connect the AC Power cable to the
Power Supply and connect the other
end of the Power Supply to the DC
Power Cable.
g
) Disconnect the DC Power Cable
from the Lower Electronics Board
Cable in the area circled. Once
disconnected, reconnect the DC
Power Cable to the AUXPS DC Power
Cable that is connected to the Power
Supply.
Connect this end
to DC Power
Cable
Connect this end
to AC Power
Cable
Ground Screw
Power Plate
b
) Cut the zip ties that are holding
the coaxial and Ethernet cables to the
frame.
c
) Remove the power plate and
connect the coaxial & Ethernet cables
and then re-install the power plate.
d
) Connect the ground wire coming
from the power plate to the ground
screw on the frame as shown.
e
) Insert the Power Supply into the