CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
9
PRE-ASSEMBLY CHECK LIST:
Provided Hardware:
Step 3 (Install Left and Right
Stabilizer Bars)
Step 4 (Install Pedal Assemblies)
Hex Bolt
M10x75mm
(Qty. 4)
M8x16mm Hex Bolt (Qty.
2)
Note: Other 6 Bolts come
installed in pedals
Spring Washer
(Qty. 4)
Step 5 (Install Upright)
Step 7 (Install Handlebar)
M8x20mm Allen
Bolt (Qty. 4)
M8x20mm Allen Bolt (Qty.
3)
Step 8 (Install Transport Plate)
Step 9 (Install Storage Tray)
M8x20mm Allen
Bolt (Qty. 4)
M5x8mm Screw (Qty. 4)
M5x20mm
Screw (Qty. 6)
Tool Requirements:
•
Allen Wrenches – 3mm, 4mm, 5mm, 6mm (included with Hardware Packet)
•
T spanner wrench (included with hardware packet)
•
Phillips screwdriver (not included)
•
13mm wrench (not included)
Step 11 (Install Rear Console Cover)
