![background image](http://html.mh-extra.com/html/true/cs200/cs200_owners-manual_1174224022.webp)
CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
STEP 13: Unit Leveling (if needed):
a
) Ensure treadmill incline
rack wheels and rear feet are
resting on the floor.
b
) Using a 15/16 inch
open end wrench, loosen
nut (A) the Rear Foot.
c
) Using a level or estimating by
sight, turn section (B) of foot
clockwise, or counter-clockwise,
using a 7/8 inch open end wrench to
level the unit.
d
) Tighten nut (A) until it is secured
against bottom of treadmill.
STEP 14: Attach Safety Key:
NOTE
: The safety key and
attachment cord are wrapped around
plate during shipping as shown.
a
) Unwind safety key and cord from
plate.
c
) Attach Safety Key magnet to front
of Center Pod as shown.
d
) Attach Safety Key clip to plate
located on Console Rack (when not
working out).
e
) Attach clip to clothing at the
beginning of any workout.
CAUTION:
Read treadmill Owner’s
Manual before attempting any
workout.
LANYARD
ATTACHED
TO PLATE
CLIP
MAGNET
A
B
Truefitness.com / 800.426.6570 / 636.272.7100
18