
TRUE
glass
door
merchandisers
-
health
safety
timer
www
.
truemfg
.
com
TEC_TM_020 REV. A
07/9/2020
Page 10 of 20
DEFINITIONS FOR ILLUMINATED LED INDICATORS
Green LED
Power On
Red LED
Wiring Fault
Audible Alarm
CONDITION
On
Off
Off
Normal
On
Off
Beep twice every 30
seconds
Utility Failure - The UPS is providing power to battery power-
supplied outlets from its battery.
On
Off
Rapid Beeping every 1/2
second
Utility Failure - The UPS is providing battery power. Rapid
beeping indicates the unit will run out of power shortly.
Off
Off
Constant tone
Overload - Occurs when connected equipment exceeds the listed
capacity of the UPS. Turn the UPS off, unplug at least one piece of
equipment from battery outlets, reset the circuit breaker and turn
the unit on.
On/Off
On
None
Electrical Wiring Fault - This indicates a wiring problem
with the AC outlet such as bad ground, missing ground, or
reversed wiring. Disconnect all electrical equipment from the outlet
and have an electrician check the outlet to insure proper wiring.
On
Off
8 beeps
Utility Failure - The frequency is beyond 47-63Hz. The UPS will
not turn on in line mode.
EMERGENCY RELEASE PULL CORD OPERATION
IN CASE OF AN EMERGENCY, THE DOOR MAY BE UNLOCKED AND OPENED FROM THE INSIDE WITH A
PULL CORD.
The pull cord is located on the inner side wall near the top above the data sticker and red "Emergency Release" sticker.
Emergency Release Pull Cord