Page 12 of 37
4.5 Inclusion of PIR Motion Sensor
1)
Open the cover of door/ window contact sensor.
2)
Put CR123A Lithium battery into the battery compartment.
*
Note: Ensure that the device is within 1 meter from the
True-i gateway for inclusion.
*
Note: Please use Wi-Fi connection during inclusion
3)
Open “TrueEye Smart Home” mobile application and click
on “Setting” as shown in the picture.
4)
To include/ add the component/ device, click “ADD” as
shown in the picture.
*
Note: Please wait until the loading is completed while
doing inclusion/ exclusion of devices and please do not
exit the application.
5)
To include the device, use a paperclip or sim card extractor
and please press the button on the rear of the device (as
shown in the picture) repeatedly 3 times per second, until
you receive the signal from “TrueEye Smart Home” mobile
application for confirmation on adding the device/
component. The case shall be opened while adding the
device.
6)
Click “OK” once the notification appeared as shown in the
picture.
After that, the device is included in the gateway for controlling
from “TrueEye Smart Home” mobile application.
