Page 9 of 37
4.2 Inclusion of AC IR Extender
1)
Put 3 x AAA Alkaline batteries into the batteries
compartment.
2)
Make sure the contacts are protruded out correctly.
3)
Assemble the sensor and battery compartment as shown in
the picture.
4)
User can also use USB power cable to power the IR
extender instead of using batteries.
*
Note: Ensure that the device is within 1 meter from the
True-i gateway for inclusion.
*
Note: Please use Wi-Fi connection during inclusion
5)
Open “TrueEye Smart Home” mobile application and click
on “Setting” as shown in the picture.
6)
To include/ add the component/ device, click “ADD” as
shown in the picture.
*
Note: Please wait until the loading is completed while
doing inclusion/ exclusion of devices and please do not
exit the application.
7)
Press the black color push button in the center repeatedly
until you receive the signal from mobile application.
8)
Click “OK” once the notification appeared as shown in the
picture.
After that, the device is included in the gateway for controlling
from “TrueEye Smart Home” mobile application.
