background image

1

TRUE

 L

IMITED

 W

ARRANTY

READ 

TRUE

’S WARRANTY SET FORTH BELOW PRIOR TO USING 

TRUE

 PRODUCTS. BY INITIAL USE OF 

TRUE 

PRODUCT YOU ARE 

CONSENTING  TO  BE  BOUND  BY  THE  FOLLOWING  WARRANTY  TERMS  AND  CONDITIONS.  THE  WARRANTY

 

PERIODS 

COMMENCE  ON  THE  INVOICE  DATE  OF  THE  ORIGINAL  PURCHASE.  LABOR  COVERED  DURING  WARRANTY  PERIODS

 

REQUIRES PRIOR AUTHORIZATION OF 

TRUE

TRUE

 WARRANTS TO THE ORIGINAL BUYER OF ALL NEW EQUIPMENT

 

PURCHASED 

FROM  A 

TRUE 

AUTHORIZED  DEALER  OR  FROM  A 

TRUE

  AUTHORIZED  MANUFACTURING  CONTRACTOR

 

THAT  THESE  PRODUCTS 

WILL  BE  FREE  FROM  DEFECTS  IN  MATERIAL  AND  WORKMANSHIP  UNDER  NORMAL  USE  AND  SERVICE  FOR

 

THE  FOLLOWING 

PERIODS AND IN THE FOLLOWING RESPECTS:

STRENGTH PRODUCTS

TEN YEAR WARRANTY COMMERCIAL PRODUCTS – Frame Components and Welds excluding coatings

FIVE YEAR WARRANTY - Bronze Bushings, Sealed Rotating Bearings, Pulleys, Weight plates and Guide Rods excluding coatings

ONE YEAR WARRANTY - Cables, Linear Bearings and Shafts and all other components not mentioned elsewhere in this warranty

90-DAY WARRANTY - Normal wear parts including but not limited to labels, upholstered pads and grips

ONE YEAR WARRANTY – Labor

THE SHIPPING MODE OF PARTS REPLACED UNDER WARRANTY TO BE DETERMINED BY 

TRUE

 PARTS REPLACED UNDER

WARRANTY CARRY THE REMAINING ORIGINAL WARRANTY PERIOD OR 90 DAYS, WHICHEVER IS LONGER. 

THIS LIMITED WARRANTY DOES NOT COVER AND NO WARRANTY IS GIVEN WITH RESPECT TO:

Products not manufactured by 

TRUE 

or by an Authorized 

TRUE 

Manufacturing Contractor.

Products which are altered without the express written consent of 

TRUE

.

Products purchased other than directly from 

TRUE

 or through a 

TRUE

 Authorized Dealer.

Defective paint, chrome and other coatings caused by environmental conditions including but not limited to climate conditions,

cleaning materials and moisture or humidity coming from HVAC systems.

All parts including but not limited to frames with cosmetic damage. Such damage includes but is not limited to scratches and

dents caused after the initial installation.

Products not maintained in compliance with 

TRUE

’s specifications as shown in the owners’ manual and on product labels.

Products with a missing, unreadable or altered serial tag.

Labor for components beyond their warranty coverage.

On site service calls to solve installation errors or to provide technical training on the proper use and servicing of the equipment.

THIS WARRANTY APPLIES UNDER THE FOLLOWING CONDITIONS.

These products have not been subjected to misuse, abuse, modifications not authorized by 

TRUE

 or any damage caused

by improper handling, natural disasters, acts of God or servicing by non-Authorized Dealers. This includes but is not limited to

the relocation of the product and the application of cleaning materials or lubricants not specified by 

TRUE

.

These products remain in possession of the original purchaser.

Warranty claims are made within the warranty periods previously shown and that such claims occur within 30-days after the

date of discovery.

Labor coverage applies only within the United States and Canada.

Warranties for parts and labor may vary outside the United States. Contact the 

TRUE

 Dealer within your geographic area

for warranty terms.

Maximum load capacities as specified by 

TRUE

 are not exceeded.

THE OBLIGATION OF 

TRUE

 UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WARRANTED DEFECTIVE

 

PARTS, 

AS 

TRUE

 MAY ELECT, AT 

TRUE

'S PLANT IN 

ST. LOUIS

MISSOURI

. PURCHASER IS RESPONSIBLE FOR

 

ALL TRANSPORTATION AND 

INSURANCE  COSTS  ON  RETURNED  OR  REPLACED  EQUIPMENT  TO  AND  FROM 

TRUE

'S  PLANT  IN

  ST.  LOUIS

.  ANY  IMPLIED 

WARRANTY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A

 

PARTICULAR PURPOSE AND 

THE  IMPLIED  WARRANTY  OF  MERCHANTABILITY,  IS  LIMITED  TO  ONE-YEAR  DURATION  FROM  THE  DATE

 

OF  DELIVERY  TO  THE 

ORIGINAL  PURCHASER.  SOME  STATES  DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED  WARRANTY

 

LASTS, SO 

THE  ABOVE  LIMITATION  MAY  NOT  APPLY  TO  YOU.  THE  REMEDY  OF  REPAIR  AND  REPLACEMENT  IS  THE  EXCLUSIVE  AND

 

SOLE 

REMEDY OF THE PURCHASER.

TRUE 

SHALL  NOT  BE  LIABLE  FOR  ANY  SPECIAL,  INCIDENTAL,  CONTINGENT  OR  CONSEQUENTIAL  DAMAGES  OF  ANY  KIND,

 

INCLUDING, BUT NOT LIMITED TO, DAMAGE OF LOSS OF PROPERTY OR EQUIPMENT AND LOST PROFITS AND REVENUE. SOME

 

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION

 

OR EXCLUSION MAY NOT APPLY TO YOU. NO ACTION FOR BREACH OF THIS WRITTEN LIMITED WARRANTY OR AN IMPLIED

 

WARRANTY SHALL BE COMMENCED MORE THAN ONE YEAR AFTER THE ACCRUAL OF THE CAUSE OF ACTION. THIS WRITTEN LIMITED

 

WARRANTY IS THE COMPLETE, FINAL AND EXCLUSIVE AGREEMENT OF THE PARTIES WITH RESPECT TO THE QUALITY OR

 

PERFORMANCE OF THE GOODS AND ANY AND ALL WARRANTIES AND REPRESENTATIONS. NO MODIFICATIONS OF THIS LIMITED

 

WARRANTY OR WAIVER OF ITS TERMS SHALL BE BINDING ON EITHER PARTY UNLESS APPROVED IN WRITING BY AN AUTHORIZED

 

CORPORATE OFFICER OF 

TRUE

. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE

 

OTHER 

RIGHTS, WHICH MAY VARY, FROM STATE TO STATE. CONTACT 

TRUE FITNESS TECHNOLOGY

., 

865 HOFF ROAD

., 

ST. LOUIS

D

MISSOURI

 

63366

, FOR A LIST OF AUTHORIZE DEALERS OR BEFORE RETURNING ANY DEFECTIVE EQUIPMENT.

TRUE FITNESS TECHNOLOGY

. ©J

ULY

 

1

, 201

6

.

Summary of Contents for XFT-100






























Reviews: