Rev C, March 8, 2018
12
Manual Number 9019049
3.4 MOUNTING
Refer to Section 2: Pre-Installation Considerations in regards to equipment location.
The TC2000 Series Static Converter is designed for base mounting only (in any orientation).
Four ¼-20 mounting holes should be provided in the aircraft in accordance with Figure 3.6.
Secure the unit with four ¼-20 pan head screws, or equivalent. A lock-washer under the head of
each screw is recommended.
3.75
5.50
13.25
11.75
14.00
(4X) Ø 0.281
Mounting Holes
3.45
6.32
Figure 3.6
TC2000 Series Static Converter Outline Drawing
