Remove all plastic coverings, labels, stickers and plug covers from the steamer and cord.
Any water droplets visible inside the tank are from quality control tests.
Always review the garment manufacturer's care label instructions before steaming. Test fabrics for
colorfastness in inconspicuous areas (such as inseam).
Grip the handle and turn counter clockwise until the arrow under the nozzle points to unlocked (as
shown below). Once unlocked, remove the steamer head.
Fill water to max level on measuring cup and pour in to the water tank. Do not overfill the water tank
past the MAX indicator line in the water tank as this may cause water to overflow or leak.
Gently place the steamer head back and twist to lock in place. Arrow should point to locked. Be sure
the water tank is locked. Failure to lock the water tank or unlocking the water tank while using or
within 30 min after using the device may result in body injury.
Unlocked
Locked
Attach fabric brush by gently pressing brush on to steam nozzle before turning steamer on.
Connect the power cord to compatible electrical outlet and press the power switch.
Once the power light is on, steamer will star to heat up. Allow 90 seconds for steam to come out.
Note: It is normal for droplets of water to come out on initial start up. This is the remaining water from
last use.
To refill / add water in your steamer: Make sure the steamer is cooled down completely before
refilling/ adding water in the water tank.
A - Stainless Steel Plated Nozzle
B - Water Tank Lock
C - Handle
D - Power Cord Base
E - Brush Attachment
F - Water Cup
G - Power Button
H - Water Tank
I - Max Water Level Line
PARTS AND FEATURES
INSTRUCTIONS FOR USE: ASSEMBLY & START UP
A
B
C
D
G
H
MAX
I
Technical Specs
600 watts
120 V
60 Hz
