background image

14

ONE YEAR LIMITED WARRANTY

SELECT BRANDS, INC. warrants, subject to the conditions stated below, that from the date of purchase, this product will be free from 

mechanical defects for a period of one (1) year.  SELECT BRANDS, INC., at its option, will repair or replace this product found to be 

defective during the warranty period.  Should this product become defective by reason of improper workmanship or material defect during 

the specified warranty period, Select Brands, Inc. will repair or replace the same effecting all necessary parts replacements for a period 

of one year from the date of purchase. 

Transportation charges on parts, or products in whole, submitted for repair or replacement, under this warranty, must be borne by the 

purchaser.

CONDITIONS: 

 This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.  Keep 

the original sales receipt.  Proof of purchase is required to obtain warranty service or replacement.  Dealers, service centers, or retail 

stores do not have the right to alter, modify or in any way, change the terms and conditions of this warranty.

Warranty registration is not necessary to obtain warranty on Select Brands, Inc. products.  Save your proof of purchase receipt.  

ABOUT YOUR PRODUCT WARRANTY:  

Most warranty repairs are handled routinely, but sometimes requests for warranty service 

may not be appropriate.  For example, warranty service would NOT apply if the product damage occurred because of misuse, lack of 

routine maintenance, shipping, handling, warehousing or improper installation.  Similarly, the warranty is void if the manufacturing date 

or the serial number on the product has been removed or the equipment has been altered or modified.  During the warranty period, the 

authorized service dealer, at its option, will repair or replace any part that, upon examination, is found to be defective under normal use 

and service.

NORMAL WEAR:  

This warranty does not cover normal wear of parts or damage resulting from any of the following: Negligent use or 

misuse of the product; Improper voltage or current; Use contrary to the operation instructions; Deviation from instructions regarding 

storage and transportation; Repair or alteration by anyone other than SELECT BRANDS, INC. or an authorized service center.  Further, 

the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.

SELECT BRANDS, INC. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied 

Summary of Contents for Crossover brewer CM-2000

















Reviews: