10
12.
Place a mug on the Drip Tray and under the Brew Spout.
TIP: If using a taller mug which will not fit underneath the Brew Spout, remove the Drip Tray and place the taller mug
on the Brewer Base. Be sure to keep the mug in place at the end of the brew cycle to catch any excess drips, since the
Drip Tray is not in place. The end of the brew cycle is indicated when the function button is no longer blinking.
TIP: To reduce splatter when using a small mug, adjust the Drip Tray position by fitting the tabs on the back of the Drip
Tray into the notches on the Brewer Housing.
13. Select the brew size by pressing the 6oz, 8oz or 10oz button. The brew cycle will now begin and the brew size button selected will
flash throughout the brewing cycle.
TIP: To stop the brewing cycle at any time, press the flashing button.
14.
When the brew cycle is complete, the flashing button will stop and all five buttons will illuminate. Five minutes after the brew cycle is
complete, the Brewer will automatically shut off.
15.
Do not leave used coffee capsules in the Brewer. Wait for the Brewer to cool before removing used capsules as they remain hot
following the brew cycle. Press the Release Button on the front of the Brewer, slide out the Brew Chamber and carefully remove the
used capsule and discard. Replace the Brew Chamber into the Brewer and lower the Capsule Puncturing / Locking Mechanism.
Place Drip Tray In Lower
Position For Use With
Taller Mugs.
Remove Drip Tray For
Use With Travel Mugs.
Raise Drip Tray to Upper
Position For Use With
Shorter Mugs.
