TW5600 Operation
Weld Settings
-
Time and Current
The time and current controls are located on the front of the welder. The controls
consist of a time button, current button, adjustment dial, fine/coarse switch, and a
supervisor lock. The digital display will indicate the settings chosen during setup.
Adjusting the Time Setting:
1.
Verify the supervisor lock is off
2.
Set the FINE/COARSE switch to the desired position
3.
Press and hold the TIME button
4.
Turn the dial to adjust the setting
5.
Release the TIME button
Adjusting the Current Setting:
1.
Verify the supervisor lock is off
2.
Set the FINE/COARSE switch to the desired position
3.
Press and hold the AMPS button
4.
Turn the dial to adjust the setting
5.
Release the AMPS button
Adjustment dial
Current button
Digital display
Time button
Fine/Coarse switch
Supervisor lock
17