Stud Gun Setup
TWE17000 Gun Setup
Each stud welding application requires that the stud gun be set up properly for the
correct stud and ferrule arrangement.
Select the correct style and size of chuck and attach it to the stud gun
Select the appropriate length leg assembly, foot piece, and ferrule grip
Secure ferrule grip to the foot piece
Tighten leg screws and washers to the foot piece and slide the legs through
the front cap nuts
After the accessories have been mounted to the stud gun place a stud into the chuck
and begin the alignment of the accessories.
Fully seat a stud into the chuck so that the stud is held firmly
Insert a ferrule into the ferrule grip
Move the leg, foot and ferrule assembly so that the stud protrudes beyond the
ferrule
1/8” stick out for studs 1/2" and smaller in diameter
3/16” stick out for 3/4” diameter studs
Position the ferrule grip assembly so that the stud moves freely through the
ferrule when lift is simulated
10
