TW5600 Operation
Weld Counter and Weld Counter Reset
The TW5600 is equipped with two different counters to display the number of times
the unit has drawn an arc.
Job Counter (Resettable)
-
Is a running total of the number of welds since the coun-
ter was last reset. This counter can easily be reset from the job counter menu.
Unit Weld Counter (Non
-
resettable)
-
Is a running total of every time an arc is drawn
on the machine. This is programmed from the factory and can not be reset.
Resetting The Job Counter:
1.
Navigate to the Job Counter Menu
2.
Press and hold the dial in until the counter changes to 0
Viewing Unit Counter:
1.
Navigate to the Unit Counter Menu
Exiting Unit/Job Counter
-
To exit the counter menu navigate to the weld settings
menu using the dial method or press and release the AMPS or TIME adjustment
buttons.
Job counter will display here
19
