Assembly of Aluminum T-14 Pole with Mounting Kit and T-14 House Mount
Step 27)
Mount the last three-section house just
like you did in step 24, and don’t forget to tighten
the wing nuts.
Step 28)
We need to attach the looped end of the
cable onto the tarpaulin hook. Again, have your
helper reverse the brake winch handle allowing
you to grasp the cable and pull it towards the
hook. Once you have looped the oval loop over
the tarpaulin hook, and your fingers are free, have
the helper raise the T-14 house by cranking the
winch clockwise. Go slowly, watch that your cable
is in the notch at the back the house.
If everything looks good, close and lock the doors,
remove the bungee cords and run your house up
the pole. Place your safety Pin (N) back into the
hole on the pole, and insert the hitch pin.
How to lock the winch
. The last item in the
mounting kit hardware box is a lock with a piece
of chain (Q). Remove the packing from the lock,
and in order to open the lock you will need to re-
move one of the keys on the key ring. Open the
lock. Take the chain wrap it so that it goes
around the winch handle behind the cable, and
then with the hasp of the lock insert it through the
chain links both ends. Close the lock.
©2023 Troyer’s Birds’ Paradise LLC. 20785 Morris Rd. Conneautville, PA 16406 814-587-2756 Page 10
Step 28
