© 2016
w w w . c l a s s i c e x h i b i t s . c o m
Order #XXXXX - MOD-1298 Pedestal Assembly
Floor
Infill
Infill
Infill
Door
Counter Top
Counter
Top
Item
12
13
14
14A
15
16
17
18
19
Description
38” RR91 Vertical Extrusion
38” RR91 Vertical Extrusion w/Door Stop
43” RR91 Vertical Extrusion
Plate for Counter Connection
38” RR91 Vertical Extrusion w/Door Hinges
20” Z46 Horizontal Extrusion
8.5” Z46 Horizontal Extrusion
20” Z45 Horizontal Extrusion
8.5” Z45 Horizontal Extrusion
Internal Shelf Support
Quantity
1
1
1
1
1
2
2
2
2
4
12
13
14
15
16
17
16
17
18
18
19
19
Steps:
1) Connect horizontals [16 & 17] between verticals resting on top of stoppers
at approximately 4” up from floor to bottom of metal.
2) Set floor in place on top of lip of horizontal extrusions.
3) Place infills in place as shown.
4) Connect horizontals [18 & 19] between verticals and atop inserts as shown.
5) Velcro shelf supports to inside of pedestal, then set internal shelf atop supports.
6) Hang door on hinges as shown in detail.
7) Place large counter top on top of assembled base.
8) Attach connector plate [14A] to vertical [14] then connect smaller counter to [14A].
9) Attach graphic to front of pedestal with standoffs as shown in detail.
Extrusions 10 and 11
have a lip for the
floor to rest
upon.
14A
Internal Shelf
Slide pin into
hinge attached to
Round Vertical.
Slide Door hinge
atop pin.
Door
Hinge
Pin
Hinge
Door Attachment
Shelf
Support
4”
Stopper at 4”
Graphic
Cap
Standoff
Barrel
Slide connector on back of
standoff barrels into groove
of extrusion and twist to
secure in place. Secure graphic
to standoffs using screw caps.
Graphic Attachment
