Assemble the throttle servo in the fuselage.
2
Clevis
3
Pin hinge(2.5x48mm)
A
B
B’’
A’’
A=A”
B=B”
1
1
Stab tube(16x690mm)
2
Triangle wood block
Triangle wood block
(15x15x40mm)
2
Ply
Ply
2
2
Metal rod(3x390mm)
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
2
2
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x80mm)
2
Steel wire (0.5x3000mm)
Wood pushrod(8x800mm)
1
Rod (2X100mm)
3
1
Rod (2x150mm)
1
Clevis
1
2
Screw (2x16mm)
Nut (2mm )
2
Washer(2x5mm)
2
Screw (4x12mm)
1
Screw (3x15mm)
2
Plastical tube(3x60mm)
Stab tube (16x690mm)
Metal rod (3x390mm)
Metal arms
Metal arms
Fuel supply line
Fuel spray line
Air pressure line
Assembly of the fuel tank.
Mount the fuel tank to appropriate position in the fuselage.
Set screw
screw(3x15mm)
wheel adapters
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
Collar (3mm)
2
Put the metal arms,wheel adapters & wood mount in the
tail fuselage,let the stab tube through all these parts.
wheel adapters
The standard sketch map when the horizontal
tail & vertical tail install completion.
38
39
41
42
8
Accessory list for the coming installation steps.
40
Lock Nut (4mm)
Bushing (8x4mm)
Wheel (100 mm)
2
2
Collar (8x4mm)
Wheel (100mm)
2
Screw (20mm)
2
Lock Nut (4mm )
18mm
1
Lock Nut (4mm)
Bushing (8x4mm)
Wheel (100 mm)
20mm
Rib template(2mm)
5mm
Ply (9mm)
2
Ply (9mm)
1
Front wheel steering mounts
1
Aluminum part(60x6mm)
2
Copper joiner
2
Aluminum tube(3x6mm)
2
Steel wire (0.5x1500mm)
TP Screw(3x20mm)
Washer (3x6mm)
4
4
1
1
Collar (8x4mm)
Wheel (100mm)
1
Screw (20mm)
Screw (20mm)
1
1
Lock Nut (4mm )
1
Rib template (2mm)
2
Plastic tube(3x50mm)
1
ply (9mm )
Lock Nut (4mm)
Bushing (8x4mm)
Wheel (100 mm)
Aluminum part(60x6mm)
Front wheel steering mounts
25mm
25mm
TP Screw(3x20mm)
Washer (3x6mm)
4
4
1.8mm
Set screw
The accessories of the nose gear.
Assemble the front wheel steering mounts to appropriate
position on the firewall with screw.
According to the rib template drill a hole one the
main wheel pants.
Assemble the wheel pants to the oleo struct and it them
with plies and epoxy glue.
Assemble the wheels to the oleo struts as illustration.
oleo strut
oleo strut
A
A’
A=A’
B=B’
B
B’
1
Clevis
23
22
24
24
25
26
5
Accessory list for the coming installation steps.
