Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
TP Screw (2x10mm)
TP Screw (2.3x12mm)
Drill proper size holes at revelant position for ensuring
the linkage rod go smoothly through it !
72mm
Metal wire
metal wire
2
Metal wire (1.7x210mm)
Metal wire (1.7x220mm)
Metal wire (1.7x210mm)
2
Metal wire (1.7x220mm)
86mm
57mm
96mm
43mm
31mm
74mm
Add a rubber ring
to the clevis for
insuring safety
104mm
The teo sides of hatch hinges
should be on the same level
48
48
TP Screw (2x10mm)
Washer (2x5mm)
Washer (2x5mm)
60mm
40mm
150º
172º
3mm
1.5mm
1.5mm
1.5mm
Ply (15x15x2mm)
12
Ply (20x16x2mm)
12
Drill proper size holes at revelant position for ensuring
the linkage rod go smoothly through it
Pleas notice the position before assemble each hatch
hinges.
Cut the covering off from appropriate position and
epoxy the plies in them.
Insert steel wire to inner and outer flaps for connection.
Assemble the flap to the main wing with TP screw.
Secure the servo.Install the nylon control horn and
connect the linkage.
3
16
15
14
11
12
13
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
2
2
2
Clevis
Copper joiner
Aluminum tube(3x6mm)
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Steel wire
Copper joiner
Aluminum tube
Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
2
2
2
Clevis
Copper joiner
Aluminum tube(3x6mm)
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Steel wire
Copper joiner
Aluminum tube
Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
Install the rudder servo.
Install the elevator servo.
Install the throttle servo to appropriate position in the
fuselage.
Assemble the rudder servo to appropriate position in
the fuselage.
Install the switch and the throttle servo
Drill a smallhole in appropriate position for throttle.
10
55
54
53
50
51
52
