10
S
ection
2 — A
SSembly
& S
et
-U
p
Overhead Chute Control (w/ Chute Control Rod)
Figure 2-20
1.
Remove wing nut (a) and hex
screw (b) from chute control head and
clevis pin (c) and cotter pin (d) from
chute support bracket. Position chute
assembly (forward-facing) over chute
base. See Figure 2-21.
(a)
(b)
(c)
(d)
Chute
Control Head
Chute
Chute
Support
Bracket
Chute
Base
Figure 2-21
2.
Place chute assembly onto chute base
and secure chute control head to chute
support bracket with clevis pin (c) and
cotter pin (d) removed in Step 1.
See Figure Figure 2-22.
(c)
(d)
Figure 2-22
3.
Finish securing chute control head to
chute support bracket with wing
nut (a) and hex screw (b) removed in
Step 1. See Figure 2-23.
(a)
(b)
Figure 2-23
4.
Insert chute control rod into the support
bracket on rear of the dash panel. See
Figure 2-24.
Figure 2-24
5.
Remove hairpin clip (a) from rear of
chute control head. See Figure 2-25.
(a)
(b)
Figure 2-25
6.
Insert chute control rod (b) into rear of
chute control head. See Figure 2-25.
Secure chute control rod to chute
control assembly with hairpin clip (a)
removed in Step 5.
STOP
STOP!
Continue to Set-Up (page
14).
Summary of Contents for Arctic Storm 300 SERIES
Page 27: ...Notes 27 5 ...
Page 28: ...28 Section 5 Notes ...
