![background image](http://html1.mh-extra.com/html/troy-bilt/pilatur-pc-21/pilatur-pc-21_instruction-manual_1173457007.webp)
Wooden Block(43x28x26mm)
1
Gear door
2
4
Collar (5mm)
Wheel (100mm)
Landing gear
2
1
8
2
TP Screw (3x20mm )
Landing gear straps
(5mm)
4
TP Screw (2.6x14mm)
2
Wooden Block(25x15x13mm)
15
TP Screw (2.3x6mm)
1
Canopy
Ply (15x15x3mm)
15
2
Exhaust
switch servo
Throttle servo
Nose wheel servo
1
Decoration
Add a rubber ring to the
clevis for insuring safety
Accessory list for the coming installation steps.
Mount the receiver and the battery in the fuselage.
The sketch map when the servos install completion.
Install the servo of switch in the fuselage.
Install the servo of switch.
Trim the decoration carefully along the shaded line.
12
64
63
65
61
62
Accessory list for the coming installation steps.
2
Wood dowel (6x50mm)
1
Stab joiner (12x240mm)
4
3
2
Pin hinge(24x24mm)
Pin hinge(2.5x48mm)
Steel wire (0.5x3000mm)
1
U-style wire (3x150mm)
1
100 mm
12 mm
6mm
12 mm
100 mm
6mm
6.2mm
Blind Nut
Tail landing gear(3mm)
1
Wooden Block (6mm Ply)
4
Wooden dowel (4x30mm)
1
Rib template (3mm ply)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
2
2
Blind Nut (6mm)
Screw(6x50mm)
Reinforcement Plate
1
9
TP Screw (2.3x6mm)
Ply (15x15x3mm)
9
Screw(6x50mm)
Drill holes to appropiate position in the wings and
epoxy wood dowels in them
Drill holes to relevant position in the fuselage
Mount the wings to the fuselage with screw .
Epoxy the belly pants to main wing and drill holes to
relevant position on the belly pants
Epoxy the main wing hardly together with wing joiner.
Main wing joiner
1
5
26
25
22
24
23
Accessory list for the coming installation steps.