![background image](http://html1.mh-extra.com/html/troy-bilt/pilatur-pc-21/pilatur-pc-21_instruction-manual_1173457004.webp)
8
2
4
2
6
Rod (2x300mm)
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Pin hinge(36x20x1mm)
6
Pin hinge (36x20x1mm)
Make sure hinges are
mounted in the same line.
Securely glue together. If coming off during flighs, you 'll
lose control of your airplane which leads to accidents!
2
Screw (3x45mm)
2
2
Clevis
Retainer
2
2
Washer(3x15mm)
Lock Nut (3mm )
TP Screw (2.3x12mm)
2
Washer
1.5mm
3mm
Rod (2x300mm)
Clevis
Washer(3x15mm)
Washer
Lock Nut (3mm )
Screw (3x35mm)
Flap
1mm
Make sure they are in
the right position while
installing.
Trailing
edge
Screw (2x10mm)
Keep some space about 1mm width between trailing
edge and flap.
Secure the servo.Install the nylon control horn and
connect the linkage.
Accessory list for the coming installation steps.
Epoxy the pin hinges to the flap.
Epoxy the flap and the retract strut covering part to
appropriate position in the main wing as below.Be careful to
ensure the moving parts of the hinges are able to move freely.
Install the servo as the illustration below.
6
7
9
8
2
10
Right view
Side View
30mm
30mm
RUDDER
25mm
25mm
AILERON
Side View
40mm
FLAP
AILERON
FLAP
ELEVATOR
Side View
25mm
25mm
Top view
Position for
right diagram.
Never fly before checking CG’s required position.
In order to obtain the CG specified reposition the
receiver and battery.
124mm
Right view
Side View
30mm
30mm
RUDDER
Epoxy the fixed landing gear to the main wing.
Adjustment.
Adjustment.
The centre of the Gravity.
Adjustment.
Adjustment.
The view of the plane form the 45 degree.
15
79
78
77
80