![background image](http://html1.mh-extra.com/html/troy-bilt/21a-630b063/21a-630b063_service-manual_1172810011.webp)
Troy-Bilt Small Frame Tillers
7
6.
TRANSMISSION REMOVAL:
NOTE:
Perform the Drive Belt Replacement sec-
tion through forward drive belt removal, prior to
performing this section. See Image Below
6.1.
Loosen the hex nut securing the forward clutch
cable to the lower cable mounting bracket using
a 3/8” wrench and a 7/16” wrench.
6.2.
Slide the forward clutch cable out of the lower
cable mounting bracket.
6.3.
Pivot the forward clutch cable’s Z fitting rear-
ward, and remove it from the forward idler lever.
6.4.
Remove the lower portion of the forward clutch
cable from the belt cover.
6.5.
Set the belt cover aside.
6.6.
Remove both self tapping hex flange screws
securing the tine hood to the right and left hood
brackets using a 3/8” socket. See Figure 6.6.
Remove Drive Belt
Remove
Drive Belt
Figure 6.6
Self Tapping
Hex Flange Screws
6.7.
Grasp the upper handlebar and pivot the unit
onto it’s nose.
6.8.
Secure the handlebar from above.
6.9.
Pivot the trailing shield up.
6.10. Remove the hex screw, bushing, lock washer
and lock nut securing the drag bar to the bottom
of the transmission using a 1/2” socket and
wrench. See Figure 6.10.
6.11. Remove both hex flange screws securing the
hood brackets to the transmission assembly
using a 1/2” socket. See Figure 6.11.
Figure 6.10
Hex Screw
Lock Nut
Lock Washer
Figure 6.11
Hex Flange Screws
Hood
Brackets