background image

2

TABLE OF CONTENTS

Section 1 - Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Section 2 - Features and Controls . . . . . . . . . . . . . . . . . . . 6
Section 3 - Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Section 4 - Operation . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
Section 5 - Maintenance. . . . . . . . . . . . . . . . . . . . . . . . 14-16
Section 6 - Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Section 7 - Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 18
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

EQUIPMENT

DESCRIPTION

Read this manual carefully and become
familiar with your pressure washer. Know the
applications, the limitations and any hazards
involved.

This manual contains information for a high pressure
washer that operates at 3,800 PSI at a flow rate of
4.0 gallons per minute.This powerful, high quality system
features large 13” wheels, a pump equipped with an
automatic cool down system, chemical injection system,
nozzle extension with quick connect nozzles, safety goggles,
heavy duty 50’ hose, and more.

Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise improve the
product and this document at any time without prior
notice.

SAFETY RULES

This is the safety alert symbol. It is used to
alert you to potential personal injury
hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.

The safety alert symbol (

) is used with a signal word

(DANGER, CAUTION,WARNING), a pictorial and/or a
safety message to alert you to hazards. DANGER indicates
a hazard which, if not avoided, will result in death or serious
injury. WARNING indicates a hazard which, if not
avoided, could result in death or serious injury. CAUTION
indicates a hazard which, if not avoided, might result in
minor or moderate injury. CAUTION, when used
without the alert symbol, indicates a situation that could
result in equipment damage. Follow safety messages to
avoid or reduce the risk of injury or death.

Hazard Symbols and Meanings

The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.

WARNING

Safety Rules

1

Section

SAVE THESE INSTRUCTIONS

Copyright © 2006 Briggs & Stratton Power Products
Group, LLC. All rights reserved. No part of this material
may be reproduced or transmitted in any form by any
means without the express written permission of Briggs &
Stratton Power Products Group, LLC.

Fire

Explosion

Toxic Fumes

Hot Surface

Moving Parts

Electrical Shock

Slippery Surface

Fall

Kickback

Flying Objects

Fluid Injection

Operator’s Manual

Summary of Contents for 20287





































Reviews: