5–4
CREATE A PROJECT
To create a new project, press
〈
3
〉
at the
Project
menu shown on
page 5–2. The gauge displays:
Project Name
<ALPHA> for Letters
<ENTER> to Exit
Press the
〈
ALPHA LOCK
〉
key to enable the alphabetic keys on the
gauge. When the alphabetic keys are enabled, the symbol
A
appears
in the upper right of the display, as shown above.
Enter the project name (up to twelve characters) and press the
〈
ENTER/START
〉
key.
If the
Layer Thickness
function (see page 2–13) is enabled, the
gauge prompts for the layer thickness:
Input Layer
Thickness
51 mm
Press <ENTER>
Enter a layer thickness from 25 to 102 mm (2.0 to 4.0 in.) and press
the
〈
ENTER/START
〉
key.
The gauge displays:
Make Project
XXX
Active?
<YES> or <NO>
To enable the new project, press the
〈
YES
〉
key. The gauge enables
the new project, displays a brief confirmation message, and returns
to the
Project
menu.
Summary of Contents for 2701 -B
