Fig. 7: Attaching the maintenance sack
7.
Put the maintenance sack (Fig. 7/1) over the
service board (Fig. 7/2) and fasten it in the
first groove with the clamping ring (Fig. 7/3).
8.
Roll up the maintenance sack and place it in
front of the particulate filter element.
Note: When rolling up the maintenance
sack, make sure that the ends of the sack
do not protrude over the service board.
9.
Close the filter casing with the filter chamber
cover in the reverse order of step 1. Screw
the clamping screws hand-tight using the
star grip.
IMPORTANT
The casing cover can only be
mounted when the clamping frame is ten-
sioned.
10.
Once you have inserted the filter, check the
sealing test groove,
.
11.
EXPLOSION HAZARD!
KSFS-...-Ex: Mount the earthing cable
from the filter chamber cover (Fig. 2/2).
Commissioning
KSFS
∙
KSFS-...-Ex Ducted particulate filters
8
