4
Transport, storage and packaging
Delivery check
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the
shipping company and your supplier immediately.
A complete shipment includes:
Electronic controller in a closed two-part
casing, including:
–
Bracket for the cover
–
2 cable glands, plastic (black)
–
2 cable clips for strain relief (reusable)
–
Flow rate transducer (with tubes con-
nected), for room or duct pressure control-
lers only with EM
‑
C
–
2-pin plug connector for connection X1
–
3-pin plug connector for connection X5
(sensor AI)
Expansion modules as ordered (see delivery
note)
Operating and installation manual
The electronic controller is typically delivered fully
mounted on a TROX air terminal unit.
If any expansion modules have been ordered, the
controller is factory fitted with these modules and
shipped as a complete unit.
Transport on site
If possible, take the controller in its transport
packaging up to the installation location.
Do not remove the protective wrapping until
just before installation.
Storage
For temporary storage please note:
Leave the device in its packaging and do not
expose it to the effects of weather.
Store the product in a dry place and away from
direct sunlight
Temperatur -10 ... +70 °C, humidity 90% max.
(no condensation)
Packaging
Properly dispose of packaging material.
Transport, storage and packaging
Control components for VAV terminal units TROX UNIVERSAL
11