12
EN
dehumidifier TTK 175 S / TTK 355 S
The device is optionally available with an operating element with
dual counter (see the image at the top right). The dual counter
registers both the operating hours and the energy consumption
and is certified according to the MID (Measuring Instruments
Directive 2004/22/EC). The kWh display is factory-calibrated
and may be used for accounting purposes. Contact your Trotec
customer service.
The
Status
LED (17) flashes once a second during normal
operation. If it flashes more frequently, lights up permanently or
does not light up at all, there might be a fault, see chapter
Errors and faults.
Condensate pump (optional)
18
No. Designation
Meaning
18
Condensate pump
button
Switching the condensate pump on
and off for draining residual water
The device can optionally be operated with a condensate pump
(see chapter Installing the condensate pump (optional)). Contact
your Trotec customer service.
Switching on and starting up the device
Info
Note that the device is only functional after three to five
minutes each time it is switched on or after the water
container has been inserted.
1. Ensure that the condensation drain hose is properly
connected to the device and is free of damage.
2. Position a sufficiently large container (at least 20 litres; we
recommend a 60-litre mortar tub) beside the device and
insert the hose end. Check the filling level of the container
regularly.
3. Make sure that the condensation drain hose is installed
with a continuous decline.
4. Insert the mains plug into a properly secured mains
socket.
5. Switch on the device at the mains switch (15).
6. Ensure that the mains switch (15) is lit.
7. Adjust the room humidity level with the rotary switch (14).
Continuous operation mode
In continuous operation mode, the device dehumidifies the air
constantly, regardless of the humidity. To start continuous
operation mode, set the rotary switch (14) to Max.
Operation with hose attached to the condensation
connection
For continuous operation or unattended dehumidification, please
connect the supplied condensation drain hose to the device.
ü
A suitable hose (diameter: 19 mm) is ready for use.
ü
The device is switched off.
1. Remove the condensation tank.
