8
EN
dehumidifier TTK 165 ECO / TTK 170 ECO / TTK 380 ECO
5. Place a second washer (16) in front of the wheel (7).
7
14
16
16
6. Insert a linchpin (17) into the hole in front of the
washer (16) up to the stop. Turn over the ring of the
linchpin (17).
17
17
16
7. Repeat this process on the other side of the axle.
8. After mounting the wheels and the feet, place the device in
an upright position.
Note
Leave the device to rest for 12 to 24 hours, so the
refrigerant can accumulate within the compressor.
Wait 12 to 24 hours before switching the device back
on! Acting contrary might lead to compressor damage
and a malfunctioning device. Any warranty claims will
be voided in this case.
Mounting the transport handle
Prior to initial start-up, the transport handle must be attached to
the device. To do so, please proceed as follows:
TTK 165 ECO / TTK 170 ECO
1. Mount the transport handle (1) to both feet (4) using four
screws.
1
4
TTK 380 ECO
1. Mount the handle (1) on both sides of the device using two
hexagon screws each.
