EN
7
dehumidifier TTK 165 ECO / TTK 170 ECO / TTK 380 ECO
Assembly
Use tools suitable for the intended task.
Mounting the feet TTK 165 ECO / TTK 170 ECO
Prior to initial start-up, the feet must be attached to the device.
To do so, please proceed as follows:
1. Place the device on its front side.
2. Mount the two feet (4) to the device sides using six
screws. The feet must protrude from the bottom side of the
device.
4
4
4
3. Then mount the wheels.
Mounting the wheels TTK 165 ECO / TTK 170 ECO
Prior to initial start-up, the wheels and the axle must be
attached to the device. To do so, please proceed as follows:
ü
The device is placed on its front side.
1. Use two large screws to fasten the axle (14) to the rear
bottom side of the device. Ensure tight fit.
14
2. Insert a standard split pin (15) into the inner hole of the
axle up to the stop. Bend the end of the split pin outwards
to fix the split pin.
15
3. Place a washer (16) on the axle (14).
4. Place a wheel (7) in front of the washer (16).
