EN
8
Operating manual – dehumidifier TTK 110 HEPA
Air purification
The fan guides the air through the inserted HEPA filter. The
HEPA filter filters particles from a size of 20 nanometres out of
the air, thus removing dust and smoke particles, bacteria,
allergens and some viruses. This guarantees fresh room air for
8 hours.
If the air purification function is activated, the fan starts running
too so that the air is cleaned by the HEPA filter. Consequently,
clean
air is blown into the room.
To maintain a constantly high filtering effect, the HEPA filter
should be replaced after one year at the latest, or sooner if
required.
ü
The HEPA filter is installed.
ü
The grid box of the
filter
indication (21) is filled and
OK
is
displayed.
1. Press the
MODE
button (23) until the
air purification
indication (17) appears on the display.
2. Press the
HUMIDITY
button (34) to select low or high fan
speed.
Info
If a HEPA filter is installed, air purification is performed
in addition to dehumidification in
automatic
,
powerful
dehumidification
and
laundry drying
mode. The
air
purification
indication (17) flashes at regular intervals
to indicate simultaneous air purification.
Ventilation
In
ventilation
mode you can choose between low and high fan
speed.
Info
Before selecting this operating mode, remove the HEPA
filter from the device (see Changing the HEPA filter).
The HEPA filter is not required for this operating mode
and its lifetime can be increased this way.
If you do not remove the HEPA filter, the filter
indication (21) flashes.
1. Press the
MODE
button (23) until the indication for the
ventilation indication (19) appears on the display.
2. Press the
HUMIDITY
button (34) to select low or high fan
speed.
Night mode
Night mode can be switched on in all operating modes. When
the operating mode is changed, night mode remains active.
In night mode, the device runs with a low fan speed.
1. Press the
SLEEP
button (24) to switch night mode on or off.
Self-cleaning function / Internal drying
This function serves to dry the interior of the device in order to
prevent the formation of mould or similar inside the device due
to residual moisture.
The self-cleaning function should be used if the device is not
operated or is stored for a longer period of time.
Self-cleaning takes approx. 1 hour. First, the inside of the
device is dehumidified at a high fan speed for
approx. 30 minutes. Then, another internal dehumidification
process takes place for approx. 10 minutes, during which the
air is blown out at a wide angle. During the last 15 minutes, the
inside of the device is dehumidified again at a high fan speed.
1. Press the
DRYING
button (27) for approx. 2 seconds.
2. To switch off the function, press the
DRYING
button (27) for
approx. 2 seconds once again. The device switches back
to the previous mode. By pressing the
POWER
button (22),
the self-cleaning function is stopped and the device
switches over to standby mode.
Ionisation
With this function, the room air is not only cleaned by means of
the HEPA filter, but additionally by means of ions. The released
ions remove pollen, dust, viruses and bacteria from the room
air.
1. Press the
IONIZER
button (29) to start the ionisation.
ð
The
ionisation
indication (30) appears on the display.
Info
This function can only be used if a HEPA filter is
installed.
