Trotec TTK 110 HEPA, Operating Manual

Page: 7 / 20

EN 6 Operating manual – dehumidifier TTK 110 HEPA
Operation
Notes:
• Avoid open doors and windows.
• After being switched on, the device operates fully
automatically.
• The fan permanently runs in automatic mode even after
the set nominal value has been reached until the device is
switched off.
Operating elements
%
HUMIDITY
TIMER
SWING
POWER
MODE
SLEEP
IONIZER DRYING
AUTO
%
°F
°C
ON
OFF
DAY
OK
NO
12 13 14 15 16 19 20 18 21 11
22
23
24
17
25 26 27 28 29 30 31
32
33
34
No. Designation Meaning
11 Condensation tank full
indication
Flashes when the condensation
tank is full, see chapter Emptying
the condensation tank
12 Automatic indication Automatic mode is active
13 Powerful
dehumidification
indication
Continuous operation is active
14 Humidity level
indication
Indicates the current room
humidity
Indicates the desired relative room
humidity during setting
Indicates the error code in the
event of a fault:
• EF (motor fault)
• E1 (fault at temperature
sensor)
• E2 (fault at humidity sensor)
• E3 (fault at coil sensor)
15 Laundry drying
function
indication
Laundry drying mode is active
16 Child lock indication Child lock is active
17 Air purification
indication
Air purification mode is active
(Only possible when HEPA filter is
used)
No. Designation Meaning
18 Temperature and timer
indication
Indicates the current room
temperature
Indicates the number of hours of
the activated timer
ON is displayed if the timer for
automatic switch-on is active
OFF is displayed if the timer for
automatic switch-off is active
19 Ventilation indication Ventilation mode is active
20 Self-cleaning function
indication
Self-cleaning mode is active
21 Filter indication OK and full grid box : HEPA filter is
inserted
NO and empty grid box : HEPA
filter is not inserted
22 POWER button On/Off button:
Switches the device on or off
23 MODE button Selection button for operating
modes:
• Automatic mode
• Powerful dehumidification
(continuous operation)
• Laundry drying function
• Air purification
• Ventilation
24 SLEEP button Switches night mode on or off
25 Filter usage indication Indicates the operating life of the
HEPA filter:
• Day indication: Number of days in
the segment display of the
filter
usage indication
• Hour indication: 1 asterisk
corresponds to 4 hours, max.
6 asterisks = 24 hours
26 Night mode indication Is indicated in night mode
27 DRYING button Switching on the self-cleaning
function
28 Fan speed indication Dynamic display for the fan speed :
turning slowly = low fan speed
turning quickly = high fan speed
Dynamic display for the
swing
function : Vertical bar moves from
left to right
29 IONIZER button Activates additional air purification
by ionisation (only possible when
the HEPA filter is installed)
30 Ionisation indication Air purification by ionisation is
indicated (only possible when the
HEPA filter is installed)