background image

EN

7

radial fan TFV 29 FS

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

Switch the device off.

Hold onto the mains plug while pulling the power cable out
of the mains socket.

Cleaning the housing

Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.

Cleaning the fan and device interior

Warning

Risk of injury caused by ejected compressed air upon
activation of the compressed air supply.
Hold the compressed-air hose away from your body.
Pointing the compressed-air hose at another person is
prohibited.

Check fan and protective grid for perfect condition before
and after each application.

Clean the fan after each operation.

Use compressed air to remove particles, lint, dust and dirt
from motor, fan wheel and protective grid. Do not in any
event use a high-pressure cleaner to clean the fan.

Other than that, the device does not require maintenance.

Technical annex

Technical data

Parameter

Value

Model

TFV 29 FS

Air flow rate

1,150 m³/h

Air discharge velocity

7 m/s

Stat. air pressure (freely
blowing)

max. 290 Pa

Max. transport medium
temperature

60 °C

Mains connection

1/N/PE ~ 230 V / 50 Hz

Power consumption, max.

0.17 kW

Nominal capacity

0.74 A

Connection cable

5 m

Protection type

IP44

Sound level (distance 3 m)

64 dB(A)

Dimensions (L x W x H)

520 x 450 x 255 (mm)

Weight

11 kg

Summary of Contents for TFV 29 FS









Reviews: