EN
5
radial fan TFV 29 FS
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
After
transporting the device, observe the following:
•
Set up the device in an upright position after transport.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
stackable: up to 5 devices may be stacked on top of one
another
Info
Do not take the devices into operation when stacked.
Stacking rules out an efficient usage of the devices.
Assembly and start-up
Scope of delivery
•
1 x Device
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
Positioning
•
Set the device up separately and in a stable position.
•
The device can be variably positioned in a way to allow an
air discharge at an angle of 0° (horizontal), 20°, 90°
(vertical), or 0° with the air outlet placed in the upright
position.
Horizontal
20°
90°
Upright
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
