EN
8
Operating manual – fan heater TFH 20 E / TFH 22 E
Using the oscillation function (TFH 22 E only)
By means of the oscillation function you can achieve consistent
heating or ventilation.
1. Switch the oscillation switch (7) at the device base to
position
I
.
7
ð
The oscillation function is activated.
ð
The device turns to and fro by up to 75°.
2. Switch the oscillation switch (7) to the
0
position to switch
the oscillation function back off.
Notice
Never attempt to manually adjust the pivoting
mechanism. The mechanism could be damaged.
Only change the air flow direction by use of the
oscillation switch (7).
Info
The oscillation continues to work even if the fan is
switched off.
Cold air operation
If you want to use the device as fan, set the function selector
switch (3) to the fan symbol
.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Switch the device off by setting the function selector
switch (3) to the
0
position.
2. Hold onto the mains plug while pulling the power cable out
of the mains socket.
3. Allow the device to cool down sufficiently.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.
