EN
6
Operating manual – fan heater TFH 20 E / TFH 22 E
Transport and storage
Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, proceed as follows:
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat.
•
protected from dust and direct sunlight.
•
with a cover to protect it from invasive dust, if necessary.
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
Assembly and installation
Scope of delivery
•
1 x Fan heater
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Position the device on even, stable and heat-insensitive
ground in a way to prevent it from tipping over.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
•
Make sure that the device cannot come into contact with
moisture or water.
•
Do not place the device beneath or in front of a wall
socket.
•
Put up the device in a way that no person, animal or plant
is positioned in its direct flow path upon switch-on.
•
TFH 22 E: Bear in mind that the device will be rotating
once you activate the oscillation function. On that account
it has an effective range of about 75° towards the front
and sides.
Connecting the power cable
1. Insert the mains plug into a properly secured mains socket.
ð
Make sure that the power cable is guided along the
back of the device. Never guide the power cable along
the front of the device!
