Trotec Speedy 100, Operation Manual

Page: 19 / 68

BA 8010_3.0_EN (10/2016) 19 / 68
3 BEFORE OPERATION
3.1 Unpacking
You receive your Trotec Speedy 100 packed in a cardboard box or wooden box, which
contains the laser and additional accessories. The following steps give you an overview of
the unpacking and assembly of the laser. Please follow these steps carefully.
Keep the packing box. You will require it in case of a return.
Dispose all waste according to the applicable waste disposal law.
1. Remove the cover. Please do not forget to store this box in a dry place.
2. Carefully remove the foam material, which protects the viewing window of the cover,
and the tape that holds this cover in place.
3. Lift the laser machine out of the box. For this you will require two persons. Position the
laser machine on a stable table, on the delivered stand (optional) or on the ride-on
exhaust (optional).
4. Remove the accessories box which contains all accessory parts required for the
installation of the laser machine.
5. Open the accessories box.