EN
3
LED work lamp PWLS 05-10 / PWLS 06-10
General Power Tool Safety Warnings – Electrical
safety
•
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
•
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged
or entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
General Power Tool Safety Warnings – Power tool
use and care
•
Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the
job better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it
on and off
. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
•
Store idle power tools out of the reach of children and
Do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool
. Power
tools are dangerous in the hands of untrained users.
•
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
•
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, Take into account
the working conditions and the work to be performed
.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean and
free from oil and grease.
Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings – Battery tool
use and care
•
Recharge only with charger specified by the
manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when operated with
another battery pack.
•
Keep the USB inputs closed with the rubber side cover
to prevent them from contamination.
If you do not follow
this advice and the USB inputs become contaminated, it
might not be possible to plug in the USB charging cable.
•
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outsides the specified range may damage
the battery and increase the risk of fire.
•
Keep charger and USB charging cable clean.
Contamination entails a risk of electric shock.
•
Do not operate the charger on highly combustible
ground (e.g. paper, textiles etc.) or in an inflammable
environment.
The heat generated by the charger during
charging entails a risk of fire.
•
Only use the supplied USB charging cable by Trotec for
the device
PWLS 06-10
.
Do not use any other USB cables.
General Power Tool Safety Warnings – Service
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
Intended use
Use the devices
PWLS 05-10
and
PWLS 06-10
according to the
technical data and only for a temporary illumination of indoor
and outdoor areas, e.g. for construction sites.
Foreseeable misuse
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
