16
EN
routing machine PRTS 10-1200
Milling with a rip fence
Use the rip fence for milling grooves or V-grooves as well as for
milling and chamfering workpiece edges.
1. Push the rip fence (
29
) with the guide rods (
17
) into the
base plate (
5
) and tighten it with the locking screws (
2
) as
required.
17
29
5
2
2. Guide the activated device along the edge of the workpiece
with an even forward motion and by applying lateral
pressure on the rip fence.
Milling circular arcs
1. Turn the rip fence (
29
) in a way that the protruding stop
parts point upwards.
28
2
5
17
29
2. Push the rip fence (
29
) with the guide rods (
17
) into the
base plate (
5
) and tighten it with the locking screws (
2
) as
required.
3. Attach the centring tip with the wing nut (
28
) through the
hole on the rip fence (
29
).
4. Pierce the centring tip (
28
) into the marked centre of the
arc and perform the milling process with an even forward
motion.
