EN
11
routing machine PRTS 10-1200
5. Screw the union nut (
31
) onto the collet chuck holder in
clockwise direction and tighten the union nut (
31
) using
the open-end wrench (
27
). Then let go of the spindle
lock (
10
).
10
20
31
27
I.
II.
III.
31
32
Pre-assembling the rip fence
1. Unscrew both screws from the guide rods (
17
).
2. Screw the guide rods (
17
) to the rip fence (
29
).
17
29
Mounting the external dust extraction system
Info
Make sure that the vacuum cleaner is suitable for the
material used. Use a special vacuum cleaner if harmful
dusts are produced.
By connecting the dust extraction system to the machine, you
can reduce the amount of dust produced during working.
1. Place the adapter for dust extraction (
30
) onto the holes
provided in the base plate (
5
).
2. Insert and fasten the 2 supplied Phillips screws (
18
) from
the bottom side of the base plate (
5
).
18
5
30
18
3. Connect a suitable vacuum cleaner (e.g. industrial vacuum
cleaner) to the adapter for dust extraction (
30
). If required,
you can first connect the reducer (
15
) to the adapter for
dust extraction (
30
). If anything is unclear or if you have
questions, please contact the manufacturer of your
vacuum cleaner.
30
15
