14
EN
routing machine PRTS 10-1200
6. Press the on/off switch (
7
) and hold it during operation.
8
7
7. After completion the milling process, release the on/off
switch (
7
) again to switch off the device.
8. Set the device down in a stable position.
8
7
Milling process
Note
Always mill against the direction of rotation of the
cutter (reverse rotation). When milling in the direction
of rotation (forward rotation), the device can be torn out
of your hand.
1. Set the desired milling depth.
2. Place the device on the workpiece to be machined with the
milling cutter that has been already inserted, then switch
the device on.
3. If required, release the locking lever for the milling depth
lock (
4
) by turning it upwards and lower the routing
machine until the milling cutter enters the workpiece.
I.
II.
4
4. When you have reached the desired milling depth, lock the
position with the locking lever for the milling depth lock (
4
)
by turning it downwards.
