18
EN
cordless grinder PMTS 01-12V
Milling:
•
Provide for an even forward motion to prevent overheating
of the milling cutter.
•
Hold onto the tool with both hands.
Engraving:
•
Guide the engraving bit over the workpiece applying light
grinding pressure.
•
Preferably use excess material to test the feed rate.
Polishing:
•
When you polish the workpiece, guide the tool over the
workpiece only applying light grinding pressure.
Applying the stainless steel brush / plastic brush
•
When you polish the workpiece, guide the tool over the
workpiece only applying light grinding pressure.
•
For polishing, buffing or cleaning with a stainless steel
brush or plastic brush, select the lowest speed level 1 to
prevent the brush and material from damage.
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed tool and the speed set are
suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Switch the device on by setting the on/off switch (
3
) to
position
I
.
3
4. Switch the device off by setting the on/off switch (
3
) to
position
0
.
3
Operating mode: Cutting
For cutting and cutting to length materials like for instance
wood, plastics, aluminium, brass or metal as well as protruding
nails or screws:
•
use the cutting discs (
8
)
Operating mode: Sanding
For sanding wood, metal or steel:
•
use the abrasive wheels (
9
)
For grinding rock or ceramic:
•
use the aluminium oxide grinding heads (
11
)
Operating mode: Milling
For milling grooves, milling out moulds, apertures or
feedthroughs in wood or plastics:
•
use the milling cutter for grooves (
14
)
For recessing or grooving material, e.g. when machining
jewellery:
•
use the milling cutter with the ball head (
14
)
Operating mode: Engraving
For creating engravings in materials like metal, plastics, glass,
ceramic, wood or leather:
•
use the diamond-tipped engraving bits (
10
)
Operating mode: Polishing
For polishing plastics or precious metals like gold and silver:
•
use the polishing attachments (
19
)
Operating mode: Rust removal
For remove rust from damaged areas, for instance in the motor
vehicle sector:
•
use the brass brush (
18
)
Operating mode: Cleaning
For gently cleaning the surfaces:
•
uses the plastic brush (
17
)
